68
System configuration management
incompatible with the current configuration automatically restores the
access point to default values when first activated after a reboot.
Upon upgrading to new system software, you are prompted to either restore
factory settings, or reboot the unit.
System log
The access point can be configured to send event and error messages to a
System Log Server. The system clock can also be synchronized with a time
server, so that all the messages sent to the Syslog server are stamped with
the correct time and date.
System log
Enabling system logging
The access point supports a logging process that can control error
messages saved to memory or sent to a Syslog server. The logged
messages serve as a valuable tool for isolating access point and network
problems.
System Log Setup—Enables the logging of error messages. (Default:
Disable)
Server (1-4)—Enables the sending of log messages to a Syslog server
host. Up to four Syslog servers are supported on the access point. (Default:
Disable)
Server Name/IP—The IP address or name of a Syslog server. (Default:
0.0.0.0)
BAP120
Using the Nortel Business Access Point 120
NN47921-301
01.01
Standard
1.0
August 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.
Summary of Contents for 120
Page 1: ...BAP120 Using the Nortel Business Access Point 120 NN47921 301 ...
Page 129: ......