Wired Controller WRC2
26
②
. If Quiet function is set, turbo function will be canceled.
3.19 Ultra-Dry Setting
Under Dry mode, when the setting temperature is 16°C(61°F), press the
▼ button
twice and the setting temperature will be changed to 12°C(54°F), the unit will then enter
the Ultra-Dry function.
When the Ultra-Dry function is activated, it can be cancelled by pressing the
▲
button or pressing Mode button to switch mode.
3.20 Other Functions
3.20.1 Lock Function
Under On or OFF status
, press ▲ and ▼buttons at the same time for 5s till the
wired controller enters the lock state. The LCD lock
will display.
.
Repress these two
buttons at the same time for 5s to quit the lock state.
When controller is locked, no other buttons will operate.
3.20.2 MEMORY Function
Memory recovery: If the Memory function is activated, the wired controller will
resume its original running state when power is restored after an outage. If this function
is deactivated, the unit will go to OFF status after power is restored after an outage.
Memory switchover: Under OFF status, press the Mode and
▲ buttons at the
same time for 5s to switch memory modes. When setting the Memory mode, the
MEMORY icon will be displayed.
Note:
It will take about 5 seconds to save data. Therefore, please do not turn off the
power immediately, or data will not be saved.
3.20.3 Selection of Centigrade and Fahrenheit
Under OFF status
, press the Mode and ▼ buttons at the same time for 5s to switch
between Centigrade and Fahrenheit scales.
3.20.4 Ambient Temperature
Under On/Off status, press the Confirm button for 5s to enter ambient temperature
interface. The timer area will show
“01” or “02” and the temperature. The outdoor
ambient temperature is indicated by
“01,” and “02” indicates the indoor ambient
