Nortek GHH092.6KSK4DH, Owner'S Manual And Installation Instructions

Page: 22 / 52

1. Press the back side of remote controller
marked , and push the battery cover as
VKRZQLQWKH¿JXUHWRWKHULJKW
2. Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of + and - poles are
DOLJQHGFRUUHFWO\
3. Reinstall the battery cover.
Battery level will be displayed on the remote
controller. When the
LFRQLVÀLFNHULQJEDWWHU\
QHHGVUHSODFLQJ
‡'XULQJRSHUDWLRQSRLQWWKHUHPRWHFRQWUROVLJQDOVHQGHUDWWKHUHFHLYLQJ
window on indoor unit.
‡7KHGLVWDQFHEHWZHHQVLJQDOVHQGHUDQGUHFHLYLQJZLQGRZVKRXOGEHQR
more than 8m (25 ft), and there should be no obstacles in the path.
‡
Florescent lamp, wireless telephone or other devices may interfere with the
UHPRWHVLJQDO,IWKLVLVWKHFDVHPRYHWKHUHPRWHFORVHUWRWKHDLUFRQGL
-
tioner.
‡:KHQUHSODFLQJEDWWHULHVXVHWKHVDPHW\SHRIQHZEDWWHULHV
‡:KHQ\RXGRQ¶WXVHUHPRWHFRQWUROOHUIRUDORQJWLPHSOHDVHWDNHRXWWKH
batteries.
‡
If the display on remote controller is fuzzy or there’s no display, please
replace batteries.
Notice
Batteries
Remove
Battery box cover
Battery
level
Operation Guide
1.
$IWHUWXUQLQJRQWKHSRZHUSUHVVWKH212))EXWWRQRQUHPRWHFRQWUROOHUWR
turn on the air conditioner.
2. Press Mode button to select your required mode: AUTO, COOL, DRY, FAN,
HEAT.
3. Press+ or - button to set your required temperature. (Temperature can’t be
DGMXVWHGXQGHUDXWRPRGH
4. Press the Fan button to set your required fan speed: auto, low, medium and
KLJKVSHHG
5. Press the
EXWWRQWRVHOHFWORXYHUEORZLQJDQJOH
Replacing Batteries in Remote
Point toward
air conditioner
3DJH