Flex Match
17
(1).
Open air inlet grille
Pull the 2 handles on air inlet grille at the same time with the direction showed by arrow in Fig.
18, pull it down slowly. (Reverse when closing)
(2). Disassemble air filter
As shown in Fig. 19, pull the handle behind air inlet grille, raise it and disassemble. Then
remove the 3 purifiers on the filter.
purifier
Fig. 18 Fig. 19
(3).
Clean
Use cleaner or water to wash filter; if the filter is too dirty (for example, oil stain), use some
warm water (but not over 45°C [113°F]) with mild detergent, then dry in the shade.
Note!
Do not clean the filter with hot water (more than 45°C [113°F]) as this may fade or warp the
filter.
Do not dry it with a hair dryer or over open flame as this may warp the filter.
(4). Reinstall air filter
Replace the 3 purifiers on filter. Install filter on the several tabs on top of air inlet grille. Pull the
handle behind air inlet grille toward inside to reattach filter as shown in Fig. 20.
(5).
Close air inlet grille (Refer to the 1
st
step)
Maintenance
Fig. 20 Fig. 21
