14
MM371W / MM372W Installation Instructions
CONTROL BOX INSTALLATION
●
Identify a suitable mounting location for your control
box at least 3 ft. from the ground and no more than 4 ft.
from the primary operator.
●
Once you’ve identified a suitable mounting location,
loosen the four cover screws and open the control
box cover.
●
Locate mounting locations marked ‘P’ inside the
control box, and use them to mount the control box
with the supplied wood screws.
●
Install the Antenna by screwing it in place on the
SMA connector.
●
Orient the antenna to the sky, and securely tighten.
R
OR
R
Attenna
Cable
3’ Min.
3’
Min.
4’
Max.
Step 1
Step 2
Step 3
Note:
If you intend to install and use the MMS100
Wireless Connectivity System (sold separately) with your
gate operator, consider mounting your control box as
high as possible to improve radio performance.
