NanoQuest Simple Installation Guide
DOC0053_Issue2.2
Connecting the NanoQuest Using Normally Closed Contacts
Connecting the NanoQuest Using Normally Open Contacts
Power Up and Confidence Check
Apply power to the unit and check
that the LED’s glows red.
Present a Master Card once to the face of the unit and check that the buzzer gives two short beeps
and the LED’s blink green and then continue to flash red. Wait 30 seconds. The buzzer should give
two short beeps and the LED’s return to a steady Red.
Press the Free Exit Button, if fitted. The NanoQuest will give a short beep, the lock will release for 3
seconds and the LED’s change to green during this period. This indicates that the unit is functioning
correctly.
