NANOQUEST USER GUIDE
Issue 02
5-5
3) If you require to set ‘Pulse
Mode’ present a valid User or
Auxiliary card a second time.
Otherwise go straight to step 4.
The LED blinks green once
and then repeat a sequence
of 2 red flashes followed by a
pause to indicate that ‘Pulse
Mode’ has been selected.
x1
x1
x2 (Pulse)
followed by a pause.
Sequence is repeated.
4) Present the original Master
card to exit programming
mode.
x1
x2
(Operating mode)
While in ‘Configure Alarm Output’ mode , if you do not present any cards for a period of thirty
seconds, the NanoQuest will exit programming mode and return to normal operation.
