Nortech Detection Pty Ltd
Unit 1, Bldg 5, Forest Central Business Park,
49 Frenchs Forest Road,
Frenchs Forest NSW 2086
PO Box 6011, Frenchs Forest DC, NSW 2086
email: [email protected]
web: www.nortechdetection.com.au
Short form User Manual
PD130 Enhanced Vehicle Detector
The PD130 is a single channel microprocessor based detector designed specifically for parking and vehicle access
control application. The PD130 has been designed using the most up-to-date technology in order to meet the
requirements of a vast number of parking applications in terms of operating conditions and options available to the user.
The primary function of the detector is to detect vehicle presence by means of an inductance change caused by the
vehicle passing over a wire loop buried under the road surface.
The detector has been designed for ease of installation and convenience. The various modes are selected by changing
the positions of the switch on the front of the unit.
The switches allow for different loop frequency settings, sensitivity settings and mode settings.
The PD130 provides visual output (LED) on the front of the enclosure and relay changeover contacts are taken on the
11-pin connector at the rear of the enclosure. The LED indicates the power has been applied to the unit, that a vehicle is
present over the loop and if there is a fault on the loop. The Presence relay is fail-safe and will close on a vehicle detect
or in the event of power failure.
In accordance with the manufacturer’s policy of updating and improving product designs, product specification is
subject to change without notice. While every care has been taken with the preparation of this document, no warranty
is offered to the completeness or accuracy of this information.
