manualshive.com logo in svg

Norstar Voice Mail 4.0, Set Up And Operation Manual

The Norstar Voice Mail 4.0 is a comprehensive communications solution for businesses. With its extensive features and user-friendly interface, this manual provides step-by-step instructions for easy set up and operation. Download the Set Up And Operation Manual for free from manualshive.com and maximize the potential of this innovative product.

Share
Download
background image

100

  Mailbox Administration Tasks

Set Up and Operation Guide

P0886600 Issue 1.0

Group List Numbers

During system installation, a number from 0 to 9 (default 9) was assigned as the 
Group List leading digit. For example, the default Group List numbers are 901 to 
999. If the leading digit is 5, the Group List numbers are 501 to 599. The Group List 
numbers are always three digits long.

The Group List leading can be changed if neccesary. For more information on 
changing the Group List leading digit, refer to 

"Changing the Group List leading 

digit"

 on page 104.

The Group List number acts like a mailbox number when you leave a message for 
the mailboxes in the Group List. The table"Sample Group List" shows two sample 
Group Lists.

Sample Group List

Adding a Group List

To add a Group List:

Group List no.

Name

Mailbox no.

901

Sales

224
223
233

902

Shipping

227
221

1. Press  

ƒ

 

·

 

°

 

‹ .

2. Enter the System Coordinator Mailbox number 

and password, then press 

OK

 .

3. Press  

OTHR

 .

4. Press  

GLIST

 .

5. Press  

ADD

 .

6. Press  

OK

 . 

If fax is available, press either  

VOICE

  

or

  

FAX

 .

Note: Norstar Voice Mail assigns a Group 

List number automatically. In this 
display, 901 is used as an example.

Log:
QUIT   RETRY   

Admin
MBOX   AA   

Admin

  CCR  OTHR

Group List Admin

   DEL   CHNG

GList: 901
              

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments

Related manuals for Voice Mail 4.0

Samsung SVM-400 General Description Manual preview
SVM-400
Brand: Samsung Pages: 40
Nitsuko NVM-2e Installation Instructions Manual preview
NVM-2e
Brand: Nitsuko Pages: 53
Nitsuko NVM-2 Release Notes preview
NVM-2
Brand: Nitsuko Pages: 57
Nitsuko NVM-NT System Manual preview
NVM-NT
Brand: Nitsuko Pages: 571

Brands by name

Popular brands

Load more brands