manualshive.com logo in svg

Norstar Voice Mail 4.0, Set Up And Operation Manual

The Norstar Voice Mail 4.0 is a comprehensive communications solution for businesses. With its extensive features and user-friendly interface, this manual provides step-by-step instructions for easy set up and operation. Download the Set Up And Operation Manual for free from manualshive.com and maximize the potential of this innovative product.

Share
Download
background image

104

  Mailbox Administration Tasks

Set Up and Operation Guide

P0886600 Issue 1.0

Changing the Group List leading digit

During the system installation, a number from 0 to 9 (default 9) was assigned as the 
Group List leading digit. You may find it necessary to change the Group List 
leading digit. For example, if 9 was assigned as the Group List leading digits, 901 
to 999 would be your range of Group Lists. If you change the leading digit to 5, the 
Group List numbers would change to 501 to 599. The Group List numbers are 
always three digits long.

Note: You cannot change the Group List leading digit to a number that will 

conflict with mailbox numbers. For example, if your company has 
mailboxes ranging from 500 to 720, you could not choose 5, 6 or 7 as the 
Group List leading digit. 

To change the Group List leading digit:

14. Press 

VIEW

 , then  

DEL

  to delete a mailbox 

number from the Group List. 

Press 

® to end this programing session.

1. Press  

ƒ

 

·

 

°

 

‹ .

2. Enter the System Coordinator Mailbox number 

and password, then press 

OK

 .

3. Press  

¤ .

4. Press  

NEXT

 .

5. Press  

NEXT

 .

6. Press  

NEXT

 .

7. Press  

CHNG

 .

8. Enter the new leading digit and press 

OK

 .

9. Press  

OK

 to configure the changes.

10. Press 

® to end this programing session.

GList members
ADD   

   

Log:
QUIT   RETRY   

Admin
MBOX   AA   OTHR

Bilingual:Y
CHNG        

Prim lang:eng
CHNG        

Group lists:Y
CHNG        

Leading digit:9

        NEXT

Leading digit:
RETRY        

System config
RETRY          

Log:
QUIT   RETRY   OK

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments

Related manuals for Voice Mail 4.0

Intelbras Impacta 140 User Manual preview
Impacta 140
Brand: Intelbras Pages: 30
unication Uni Voice Installation Manual preview
Uni Voice
Brand: unication Pages: 105
VoxBox Lite Edition User Manual preview
Lite Edition
Brand: VoxBox Pages: 127

Brands by name

Popular brands

Load more brands