Norsonic Nor265, User Manual

Page: 27 / 32

Nor265 User Guide
Norsonic AS
27
Instruction Command Parameter Notes
Program Flash
memory with
running SW.
BFBurnFlash Intended for use by Norsonic only.
Display memory DM x For debugging by Norsonic only.
8.2.3 LP command
When the LP command is executed, a list of the parameters associated
with position 1 to 8 for the front panel switch is returned: The list has
the following format where the first number in each line corresponds
to the switch position number.
1, <Type>, <Info> <CR> <LF>
2, <Type>, <Info> <CR> <LF>
3, <Type>, <Info> <CR> <LF>
4, <Type>, <Info> <CR> <LF>
5, <Type>, <Info> <CR> <LF>
6, <Type>, <Info> <CR> <LF>
7, <Type>, <Info> <CR> <LF>
8, <Type>, <Info> <CR> <LF>
The <Type> of operation is indicated by a number between 0 and 5.
The <Info> will contain a list of parameters relevant for the Type. The
designators for the parameters correspond to the commands in the list
for remote commands. Each parameter is separated by a comma
symbol ",".
<Type> Type Parameters in <Info> field
0 Stop [SP]
1 Sweep [ST] TA TT SA SB
2 Go to [GT] TA TR GT
3 Go relative [GR] TA TR GR
4 Continuous positive rotation [CP] TA TR
5 Continuous negative rotation [CN] TA TR