NORSELIGHT R60 Series, Installation & User Manual, Page: 12 / 34

12
3.3 Installation, software settings
First start-up and after power loss
When all cabling and mechanical
installation is done turn on the power.
With every power loss of the searchlight,
always starts an inifi alization.
Be sure the searchlight can move 360°
horizontal and +/-30 ° vertical.
The searchlight will now run all motors to
calibrate its position.
Do the same procedure for all searchlights
in the system.
The reset do also have to be done after
power loss.
1.
2.
3.
Select all searchlights in the system.
The searchlight is labeled with ID.number on
the motorhouse and on the inside of the back
cover to the motorhouse.
5.
123
4.
6.
Continue with hardware settings on page 13