©Norsat International Inc.
(“Norsat”) All Rights Reserved
2021-08-06 050196 Rev E
20
5.2 Cable Connection
Connect cables according to the table below. Ensure to connect the antenna and BUC power
supplies to the AC outlet last.
Note
: For OpenAMIP connection, the remote end of the remote cable from the ACU needs to
output to both the computer and modem through a switch.
Refer to the next page for the connection diagram for both Open and Non-OpenAMIP modem
implementations.
SIGNAL
ACU Port
TO
CABLE
DC Power Input
DC IN
Power Supply
Power Supply DC Cable
Compass Data
SENSOR
Compass on Petal
Sensor Cable
Tx Signal
Tx
Modem Tx Port
Tx Cable (Red End)
Rx Signal
Rx
Modem Rx Port
Rx Cable (Green End)
GPS Data
MODEM
Modem Console Port
Modem cable
Remote Control
REMOTE
Laptop
(and Modem LAN port
for OpenAMIP)
Remote cable
BUC DC Power Input
(Optional)
BUC DC IN
BUC Power Supply
Power Supply DC Cable
