©Norsat International Inc.
(“Norsat”) All Rights Reserved
2021-08-06 050196 Rev E
19
19. Repeat the following steps when installing petals 1 through 8 in ascending order:
a. Loosen the thumbscrew to limit
b. Insert the reflector petal into the pedestal
c. Lock the reflector petal into place by tightening the thumbscrew.
d. Engage the latch between any adjacent petals by following the steps outlined in
the sequence below:
Push in the center pin
with metal handle
parallel to top surface.
The latch will be facing
the ground.
Rotate latch 90 degrees
perpendicular to top
surface
Fold down latch to top
surface and secure it so
that petals are
connected to each
other.
20. Assembly is now complete.
