Montagehinweise / Mounting information / Consigne de montage / Montagetip
2022-07-08 / 8214 316 / F
10 von 32
|
NORMBAU
Maintenance
NORMBAU products are note maintenance-free! The products are to be tested
monthly by qualified specialists for proper function. In the event of defects (e.g.
insufficient braking force), the assembly instructions must be observed.
Care and cleaning instructions
Risk of injury
Improper cleaning can cause damage to the surface and lead to injuries.
Cavere Care
Powder-coated products from NORMBAU have a smooth, easy-to-clean surface. In
order to maintain the decorative design and color of the coating of our products for
years, cleaning and care must be carried out professionally. Slightly adhering dirt
can be removed with a sponge and water to which a neutral cleaning agent (e.g.
dishwashing liquid) is added. Immediately after each cleaning process, rinse with
pure, cold water. A chamois or microfiber cloth removes the remaining wiping marks
or drops of water. Abrasive or strong acidic/alkaline cleaning agents should never
be used. With metallic coatings, heavy soiling should be cleaned as soon as
possible, since dried and old dirt can often only be removed abrasively and with the
risk of damage to the powder coating or a change in color. Common wiping
disinfectants can be used.
Cavere Care Chrome
Abrasive sponges and scouring agents should not be used to clean our Cavere
Chrome products. We also advise against the use of cleaners containing solvent or
acid, limescale removers, vinegar and cleaning agents containing acetic acid.
The chrome surface can be cleaned using a little soap on a damp cloth. Limescale
stains can be avoided by drying the tap after every use. If limescale deposits still
build up, you can remove these using an environmentally friendly cleaning agent.
The appropriate cleaning agent should only be left on for a short time before being
rinsed thoroughly with water. In areas with hard water, it may be necessary to clean
the chrome surface at specific intervals. Please observe the following points when
cleaning:
Residues from toiletries such as shampoo, shower gel or liquid soap should be
removed quickly as these can leave permanent stains.
Harsh cleaning methods and aggressive cleaning agents can damage surfaces
and even penetrate the inside of the products.
Do not apply spray cleaners directly to the chrome surface. Spray the cleaning
agent onto a soft cloth and use this to wipe the surface instead.
Use clean water to rinse the chrome surface thoroughly after cleaning.