background image

I  •  Introduction

Thank you for purchasing a NORMA Audio product.

Please read this manual thoroughly before making 

connections and plugging in the unit to the mains 

power supply.

Following the instructions in this manual will enable you 
to obtain optimum performance and listening enjoyment 
from your new NORMA unit. 

Please retain this manual for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK, DO  NOT EXPOSE THIS 

APPLIANCE TO RAIN OR  MOISTURE.

The lightning flash with arrowhead symbol, within an 

equilateral triangle, is intended to alert the user to the 

presence of uninsulated "dangerous voltage" within the 

products enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in the 

literature accompanying the appliance.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 

COVER  (OR BACK).  NO  USER-SERVICEABLE  PARTS  INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

II  •  Unpacking

Follow these steps to safely unpack the NORMA unit:

•  Open the shipping box and remove the top layer of foam. 

Be careful not to damage the inside of the package with 
the knife.
The packaging must contain the following items:

1  NORMA;

1  Remote control unit;

1  AC power cord (in some countries);

1  User manual;

1  Warranty police and registration card.

•  Grab the underside of the NORMA unit and lift it straight 
out of the packing box;

•  Place the NORMA unit in a safe location and remove the 

protective plastic wrapping. 

 Note:

If any accessories are missing, or if the unit is damaged or 
fails to operate, notify your dealer immediately. If the unit 
was shipped to you directly, notify your shipper immediately. 
NORMA recommends that you retain the original carton 
and packing materials in case you need to move or ship 
the unit in the future. Neither NORMA or the shipper can 
be held responsible for damages incurred during transit if 
the original factory packing is not used. All factory returns 
require that a previous return authorization number be 
issued by NORMA prior to shipment.

Keep this manual handy for future reference.

Register your NORMA unit online at www.normaudio.com 
within 15 days of purchase. Retain the original, dated 
sales receipt as proof of warranty coverage.

 Caution:

Keep the carton box, the foam protection and the PET 

sheet out of the reach of children, choking hazard.

REVO

 

CDP 

/

 DS-1 

/ Safety manual

I / II  •  Introduction / Unpacking                 

I

Summary of Contents for REVO CDP







































Reviews: