4 • Aux overview
9
REVO
CDP
/
DS-1
/ Aux overview
J4
J5
J1
J2
Note
1
Default, IN 5 INPUT
YES
YES NO
NO
J1
J2
J4
J5
Description
Default configuration (IN 5 INPUT)
Note
2
Input 5 as SPDIF output
NO
NO YES
YES
J1
J2
J4
J5
Description
IN 5 OUTPUT
4.1 Output - input configuration (only for DS-1)
Tab. Aux 2
Default configuration
Tab. Aux 3
IN 5 OUTPUT
Notes:
YES = means Jumper FITTED ON.
NO = means Jumper FITTED OFF.
Anything = means Jumper INDIFFERENT, FITTED ON or OFF in
depending on other configuration.
The Jumpers J1 and J2 are located near the IN 5 RCA
connector on the SRC-1 board. The Jumpers J4 and J5 are
behind the CD reader mechanics. Some spare jumpers
are supplied in the spare fuse bag, attached to the device
instruction manual.
1 • Default configuration
In the default configuration the Input IN 5 is configured
as SPDIF input. J1 and J4 are fitted.
2 • Input 5 as SPDIF output
When J2 and J5 are fitted the IN 5 is configured as output.
Caution:
The configuration of the inputs involves the removal
of the top cover, therefore it is a potentially
dangerous operation. It must be carried out by
qualified personnel in compliance with all safety
standards. In particular, but not only, the device must
be disconnected from the mains and disconnected
from any other equipment, must be turned off for
at least 10 minutes and you must make sure that
all capacities are discharged. To be sure that the
capacitors are discharged there are 3 LEDs on the
power supply board (under the transformer), if
the LEDs aren’t lit the capacitors are completely
discharged.We are not responsible for wrong or
partial configurations of these jumpers.
4.2 Fuse replacing
Supplied with this device there is a small bag with some
spare screws, jumpers and fuses. If a fuse blows up there
is the possibility of replacing it but only with the same
type, voltage rating, current rating and most importantly
the action speed (slow “T” or fast “F”).
Caution:
Never bypass a fuse and never replace a blown fuse
with a different one. This may cause fire and electric
shock. We are not responsible for any injury or
damage due to a wrong fuse replacing or any type of
tampering.
Jumper J1 and J2 position
Fig. Aux 2
Jumper J4 and J5 position
Fig. Aux 4
Summary of Contents for REVO CDP
