background image

 

 

 

 

 

7/20   171215 

 

  Do not use the appliance should the power cord become damaged.  The power 

cord should not be altered, jerked, pinched, bundled and/or used to hang objects 

from.  Such actions could result in electrical shock or fire.  To disconnect the unit 

from power, be sure to grasp and pull on the plug, not the cord. 

  Should the power cord require replacement or service, use only the 

manufactures replacement parts and be sure to connect the green ground wire to 

the appliance in the same manner the original wire was connected. 

  Do not spray or splash water on the appliance as this may cause short circuits, 

electrical shock, corrosion or failure. 

  Do not make alterations or modifications to the appliance as these could result in 

electric shock, injury, fire or damage to the appliance. 

  Children must be properly supervised around this appliance.   

  This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities or lack of experience and 

knowledge unless they have been given supervision or instruction concerning its 

use by a person responsible for their safety. 

  Do not climb, stand, or hang on or into the appliance or its components.  Death 

or serious injury could occur or the appliance could be damaged. 

  Use caution when opening doors or lids and keep fingers out of pinch points 

areas. 

  Do not use combustible sprays or aerosols around the appliance as they may 

catch fire. 

  Do not store gasoline or other flammable substances in or near the appliance as 

they may catch fire. 

  Keep the area around the appliance clean.  Dirt, dust or insects around the 

appliance could cause harm to individuals or damage to the equipment. 

  Do not load the shelves with more than 100 pounds of load as they could fall and 

cause injury. 

  Do not block air inlets or outlets as this would cause cooling performance to be 

reduced. 

  Do not overload the storage capacity of the appliance.  Allow space between 

stored items for air flow. 

  Do not load warm or hot items into the appliance.  Allow them to cool first or they 

will raise the cabinet temperature and could hasten the deterioration of other 

foods stored in the cabinet. 

  This appliance is designed for the temporary storage to food products.  Use 

proper sanitation practices. 

  All food products should be covered or stored in sealed containers.  Open foods 

may dry up, pass their smell to other foods and increase cross contamination.  

Some food products may accelerate corrosion of the evaporator resulting in 

failure of the appliance to cool. 

  Component parts must be replaced with manufacturer original equipment parts. 

 

 

Summary of Contents for UF27













Reviews: