27
Changing Other Features
Adjusting the Temperature / Water Quantity Display
Note: The setting must be done within the first 10 minutes of connecting electrical power to the water heater.
Table of Setting Items
Display
Power On/Off Button
ENTER Buttton
Setting Procedure
1. Turn the water heater off by pressing the Power On/Off Button on the remote controller.
2. Disconnect, then reconnect electrical power to the water heater.
3. Press the MENU Button inside the cover, select "Initial settings" using the ▲/▼ Buttons.
4. Press the ENTER button, the "Initial settings" screen appears on the display.
5. Select "[°F / gal] <----> [°C
/ L]" using the ▲/▼ Buttons.
6. Press the ENTER Button and select either [°F / gal] or [°C
/ L] using the ▲/▼ Buttons.
7. Press the ENTER Button, "Set complete Please wait..." appears on the display for 5seconds and
then the "Initial settings" screen appears on the display.
8. To confirm the setting, turn the water heater on by pressing the Power On/Off Button on the remote
controller.
Remote Controller
▲/▼ Buttons
MENU Button
Item
Choices (factory defaults shaded)
Celsius / Liter
or
Fahrenheit / Gallon
display mode.
°F / gal
(Fahrenheit / Gallon)
°C / L
(Celsius / Liter)
