15
Step
Installation Procedure(ex. @Garage)
Necessary Tool
13 Use a marker to mark the cutting position.
14 Attach
"
①
Universal Rain Cap"
①
Universal
Rain Cap
Step-2
(W
ork on rooftop)
※
All cuts must be made at right angle to the pipe. All field cuts must be deburred.
※
Take precaution not to drop debris into
"
③
Flex Pipe 2""
. In case debris is dropped,
remove from the lower end of the
"
③
Flex Pipe 2""
.
Mark
3 ribs
Completely Insert "
①
Universal Rain Cap" into the "
③
Flex Pipe 2"",
"
①
Universal Rain Cap" overlap "
④
B-Vent" by 1/2".
Be sure to do
More
than
1/2”
}
PVC Cutter
Box Cutter
or
14
Step
Installation Procedure(ex. @Garage)
Necessary Tool
10 Take off the existing rain cap
and place it on the area where it does not fall from the rooftop.
※
Make sure the inside surfaces of the
"
④
B-Vent"
are clean to ensure a good seal of the parts in this step.
Wet Towel
11 Use a marker to mark the original position of the
"
③
Flex Pipe 2""
, at
"
④
B-Vent"
's upper tip.
Marker
12 Slide-in the
"
②
Top Flex Support"
to the
"
③
Flex Pipe 2""
.
②
Top Flex support
Mark is very important for the function. Do not skip this step.
(Necessary for the next step.)
Be sure to do
Inert the
"
②
Top Flex Support"
's slit straight into the Flex Pipe groove.
Be sure to do
Step-2
Slide-in
Pull up
Mark
Verify that you can see the mark you made at the top end of the
"
②
Top
Flex Support"
in the previous step.
Be sure to do
