background image

30

A warranty registration card is included separately.

Be sure that the plumber, date of purchase and other necessary items are filled in.

Read the content carefully, and keep the warranty card in a safe place.

For repairs after the warranty period, there will be a charge on any service, and service will only 

be performed if the unit is deemed repairable.

Follow-up Service

Requesting Service

Period of Time for Stocking Repair Parts

Warranty

First follow the instructions in the troubleshooting section (   p.25 to p.29).  

If the error is not corrected, contact Noritz America Technical Support at 866-766-7489 or 

http://support.noritz.com/.

*  A request for service may be rejected if the water heater is installed  

in a location where working on the unit may be dangerous. Contact a 

plumber.

We will need to know:

The Model

 

 .................

(check the rating plate)

   *See p.4 for the location of the label

Date of purchase

 ......(see the warranty)

Details of problem

 ....

(flashing error codes, 

                                     etc., in much detail as possible)

Your name, address, and telephone number

Desired date of visit

Noritz will stock repair and maintenance parts for this unit for the time period from the date of 

the production date as follows: twelve (12) years for the heat exchanger and ten (10) years for 

remaining parts.

Reinstallation

If you want to reinstall the unit at a different location, confirm that the gas and power supply 

indicated on the rating plate are available at the new location.  If you are not sure, consult the 

local utility company.

Summary of Contents for eco TOUGH NRC661

































Reviews: