manualshive.com logo in svg

Noritz CB180-DV, Owner'S Manual

Share
Download
Noritz CB180-DV Owner'S Manual Download Page 8

8

Before Operation

Chapter 2. – Safety Regulations 

WARNING

Do not store flammable material in the appliance 

room.

Do not store portable gas container, thinner, oil, or other 

flammable materials in the room. Otherwise, fire may break out.  

Do not place combustible items, such as newspapers 

or laundry, near the appliance or venting pipe.

Do not store combustible (flammable) materials such as papers. 

Do not hang clothes on the exhaust vent. Otherwise, fire may 

break out.

CAUTION

Pull out the power plug from the receptacle if light-

ning strikes.

Lightning can damage the Combi Boiler. Pull out power cord 

plug if lightning strikes for your safety.

Before Operation

Burn Protection

Be cautious when opening the Domestic Hot Water tap. 

The water may be very hot. Especially, children, disable and 

elderly are at the highest risk of being scalded.

 (Freeze protection is unavailable if the unit is unplugged from 

power.)

Summary of Contents for CB180-DV







































Reviews:

No comments

Brands by name

Popular brands

Load more brands