23
How to use Control Panel- User Mode
Chapter 3. – Unit Operation
1. In the ‘User Mode’, turn the ‘Dial Button’
until [g:EH] is displayed.
2. ERROR CODE that have occurred can be
identified and ‘E0.11’ is blinking when the ‘Dial
Button’ is pressed in ‘[g:EH] ’.
3. ERROR CODE that have occurred from E0
to E9 can be identified by turning the ‘Dial Button’
clockwise.
Error History
[For example]
1 st error occurs : 11
2 nd error occurs: 16
7. ‘Error History’. [g:EH]
- Refer to page 22 for directions on how to enter ‘User Mode’.
- Refer to page 22 for directions on how to enter ‘User Mode’.
1. In the ‘User Mode’, turn the ‘Dial Button’
until [C:TL] is displayed.
2. Press the ‘Dial Button’ so ‘oFF’ is blinking.
3. Turn the ‘Dial Button’ clockwise
so ‘on’ is blinking.
‘Lock Mode’ Icon
Lock Mode
6. Lock Mode [C:TL]
By locking the control panel, the settings cannot be accidentally changed if a button is pressed by mistake.
4. Press the ‘Dial Button’ to save the setting.
The Lock Icon will display on the control panel.
4. Press the ‘Dial Button’
to return to ‘User Mode’
Summary of Contents for CB180-DV
Page 9: ...9 ...
Page 37: ...37 Memo ...
