NORIS Automation GmbH
Installation | 4
Instruction manual FA13
21 / 44
Use appropriate tools and do not apply excessive force when
mounting the sensor.
The sensor may otherwise be damaged.
Scanning distance
Note the permissible scanning distance.
Make sure that the specified scanning distance is maintained.
If the distance to the scanning object is too low, signal distortion
and signal loss may occur as well as damage to the sensor and the
scanning object. Signal distortion and signal loss may also occur if
the scanning distance is too high.
Connection and securing connectors
When mounting the sensor, the data and information on the customer
drawings always have priority over the information in this instruction
manual.
Do not touch electronic parts of the sensor (connector pins,
open cable ends, etc.) without appropriate measures to ground
your body (e. g. ESD wristband).
Otherwise electrostatic discharge may damage the sensors’ elec-
tronic components.
Do not loosen the cable gland.
Otherwise humidity and dust may damage the sensors’ electronic
components.
The connection are to be made and connector secured exactly
as described on the customer drawings and in this manual.
Incorrect wiring and incorrectly or inappropriately tightened screw
connections can result in signal loss or damage to the sensor and
connection.
Cable laying
Make sure that the connection cable is layed correctly.
Incorrectly layed connection cables may result in signal loss or
damage to the sensor.
NOTICE
NOTICE
NOTICE
NOTICE
NOTICE
NOTICE
