4 | Installation
NORIS Automation GmbH
20 / 44
Instruction manual FA13
Installation
Information on avoiding faults and material
damage
Mechanical and electrical stress
Note, that excessive mechanical stress of the sensor housing
and the measuring area may damage the sensor.
The manufacturer will not be liable for damages caused by exces-
sive mechanical stress.
Note, that excessive electrical stress (e. g. electrical field
strengths in the range of the insulation resistance and high
line-conducted interferences) may damage the sensor electron-
ics.
The manufacturer will not be liable for damages caused by exces-
sive electrical stress.
Protective cap / Soiling of sensor
Ensure that you remove the protective cap only when mounting
the sensor. Otherwise the sensor may be damaged.
At delivery the sensor is equipped with a protective cap to protect
the measuring area and the electronic parts against mechanical and
electrical damage.
Ensure that the measuring area is not soiled.
A soiled measurement area may lead to signal loss or even damage
to the sensor. Also note the recommendations in the “Maintenance”
Section.
Sensor mounting
When mounting the sensor make sure that the screw connections are
tightened appropriately. Therefore, note the instructions in Section “In-
stalling the speed sensor”.
4
4.1
NOTICE
NOTICE
NOTICE
NOTICE
