4
RECOMMENDED EQUIPMENT USED WITH THE MULTIPOINT LOCK
FIXTURE
DOOR
ROUTER
Porter-Cable 893PK 2HP Plunge Router (Norfield P/N POR893PK) or equivalent
(recommended because of quick change template guide)
BITS
½” diameter x 5-1/2” OAL (Overall Length) router bit: FOR53486 or equivalent. (use
with 13/16” OD guide)
TEMPLATE GUIDE
13/16” outside diameter guide: Norfield NOR62949 or equivalent (use with ½” dia. bit)
and Norfield POR42237 nut.
TEMPLATES
A set of templates and alignment blocks for the specific hardware to be installed
NORFIELD MasterLine Stylizer II (MFG400)
This can be used to make the Eurogroove in the door
Router – POR690 – FIXED BASE
Bit – Eurogroove bit
JAMB OR T-ASTRAGAL
NORFIELD MasterLine StrikeMaster (MFG600)
This can be used to mortise strike jambs and t-astragals for strike plates
Router – DEW621 - PLUNGE
Bit – SAF85
Template Guide – POR42045 – 5/8” diameter
A set of strike plate templates (these templates will work on either the StrikeMaster or the
T-Master
If it is desired to mortise the t-astragal after it has been attached to the door use the
following fixture. The above tools and templates for the StrikeMaster will also work on
the T-Master.
NORFIELD MasterLine T-Master (MFG650)
