25
SETTINGS AND ADJUSTMENTS
3-3 ADJUSTMENT FOR DOOR WIDTH:
3-4 ADJUSTMENT FOR NOMINAL WIDTH DOORS:
3-5 ADJUSTMENT FOR ODD WIDTH DOORS:
The top section can be raised or lowered to adjust the machine for any door width between 1-6 and 4-0.
There are two methods for establishing door width:
1) index at 2” nominal widths
2) stop the width adjustment at any increment using the width scale.
The controls for making this adjustment, the “DOOR WIDTH” switches are located on the main control
panel at the front of the machine. CAUTION: There should be no doors in the machine when this adjust
-
ment is made.
To raise or lower the top section rotate the FAST switch to either the UP or DOWN position, as necessary,
and watch the scale until you are approximately 1/4” below the width setting you want, then rotate the
SLOW switch to the UP position and release it. The top section will go up slow and stop at the next door
width.
Rotate the FAST switch to either the UP or DOWN position, as necessary, and watch the scale until it is
near the width you desire, then momentarily turn (or bump) the FAST switch until the scale reads the cor
-
rect door width.
FAST DOOR WIDTH
ADJUSTMENT
SLOW DOOR WIDTH
ADJUSTMENT
FIGURE 2-4
