background image

 

  

 

 

2. OVERVIEW 

 

Thank you for purchasing the iQ Zonesystem. As one of the most advanced systems on the 
market, it provides you with the most comfortable temperature for each room or group of rooms 
independently. 

When the system is installed in your home, all of the individual spaces are grouped into two to 
eight separate zones. Each zone typically includes at least one room and several supply 
registers. The controls installed with the system have been configured to reflect this zone 
grouping. Each zone has also been assigned a “weight” which roughly indicates its percentage 
of the overall home floor space. 

The system is provided with one thermostat in each zone so that you can set the desired 
temperature and other features. 

iQ Zone allows you to: 

9

  Turn off the cooling and/or heating of empty 

rooms so that you can 

use energy efficiently

9

 iQ Zone 

takes advantage of the location and 

environment of each room

. For instance, a 

room that is situated in a shaded area requires 
less cooling power in order to lower the room’s 
temperature, while rooms exposed to full 
sunlight, usually require less power to heat 
them up.  

9

  iQ Zone uses one iQ controller, and several 

small thermostats, which have 

unobtrusive 

and simple designs with low visual impact

 

so that they do not affect the decoration style 
of your home. 

 

3. IQ CONTROLLER 

 
Every iQ Zone system has one iQ Controller as well as local zone thermostats. Note that you 
always have the choice between operating the system by zones as described in this document, 
or operating as a single entity like a typical non-zoned system (by temporarily disabling zone 
control operation). See iQ Drive User’s Manual for details of its operation. 
 

4. LOCAL ZONE THERMOSTATS 

 

4.1 Thermostat Display Icons 

 

It is important to become familiar with the symbols that you will see on your thermostat. Review Figure 2 
below to help understand what you see in the display screens. 

 

Figure1 – Typical Zone Assignment for a Home 

Zone1 

68 F 

Zone2 

OFF 

Zone3 

OFF 

Zone 4 

64 F 

Zone5 

70 F 

Summary of Contents for Airzone iQ Zone





























Reviews: