StediFlo
t
57:1 Pump
9
Part 1601882-01
E
2012 Nordson Corporation
Circulating System Diagram
1
2
3
4
5
6
8
9
10
14
11
10
13
10
15
16
18
7
17
12
Figure 4
Typical Circulation System Configuration
1. Plant air line
2. Drop leg
3. Drain valve
4. Air shut off valve (self-relieving)
5. Filter/Regulator/Gauge
6. Air hose
7. Coating supply
8. Siphon rod and strainer
9. Siphon hose
10. High-pressure fluid hose
11. Fluid filter
12. Filter drain valve
13. Spray gun
14. Fluid heater
15. Circulation valve
16. Drain valve
17. Drain hose and rod
18. Waste container
Note:
To install the optional circulation valve kit, refer to the instructions included with the kit.
Mounting
If the pump is mounted on a cart, make sure the cart is parked on a level
and solid surface. Leave space around the cart to work.
If mounting the pump on a wall or fixed stand, use M12 screws, class 8.8.
Mount the pump so that at least 10 cm (4 in.) of free space is left between
the floor and the suction fitting. Refer to
Options
in the
Parts
section for an
optional wall mounting bracket.
