Standard iControl Power Supply Kit
3
Part 1107150-02
E
2020 Nordson Corporation
Installing New Power Supply
See Figure 2. Use the iControl Power Supply Kit to install the new power
supply and new harnesses.
1. Mount the new bracket (11) onto the sub-panel using the M4 x 12
screws (12) saved from the power supply removal.
2. Connect the new AC power harness (8) to the AC input terminals (6),
the terminal block (9) and ground stud (7). Follow wire colors as shown
3. Connect the DC power harness (4) to power supply terminals (5B and
5C) and the P1 header (2) on the back plane (1).
4. Connect the digital flow harness (3) to the power supply terminals (5A
and 5B).
5. Mount the new power supply (10) onto the bracket (11) with the label
facing up and the AC power harness connections (6) on the right side.
6. Use the M4 x 6 screws (12) and washers (13) to secure the power
supply (10) to the bracket (11).
7. Dress out wires with provided cableties.
