Nordson HORIZON 200, Product Manual

Page: 78 / 124

Repair
7-12
Part 106913 − 04
E 2018 Nordson Corporation
Fan and Fan Drive Repair
The fan and fan drive repair procedures cover the replacement of the
following components:
S
V-belt
S
Sheaves and bushings
S
Motor
S
Fan
S
Fan shaft and bearings
NOTE:
Whenever any of the components in the fan drive are replaced,
adjust the drive to the dimensions given in Figure 7-6 .
The Horizon 400 motor is mounted to the floor of the fan compartment. The
Horizon 200 motor is mounted on the side of the two fan-shaft bearing
supports. Removal and installation procedures for the V-belts, sheaves,
motor, fan and inlet cone, and fan shaft and bearings are the same, except
for the location of the motor.