Nordson HORIZON 200, Product Manual

Page: 37 / 124

Operation
3-11
Part 106913 − 04
E
2018 Nordson Corporation
11. Make sure the accumulator vent hose (5) is connected to the
color-module vent stub, and the vent-assist air tubing is connected to
the tube fitting.
12. Make sure the transfer hoses (3) are connected to the accumulator (8).
13. Install new feed hoses (7) between the powder pumps and the spray
guns, or use hoses that have already been used with the new color.
14. Perform the Startup after Color Change procedure on page 3-15.
7
6
2
4
1
9
3
5
8
10
Figure 3-6 Color Change: Reclaim-to-Reclaim (Horizon 400 Shown)
1. Clamping strap ratchets
2. Quick-disconnect plates
3. Transfer hoses
4. 10-tube connectors 5. Vent hose
6. Level sensor
7. Feed hoses 8. Accumulator
9. Handle
10. Junction box