Nordson FoamMelt 200, Product Manual

Page: 17 / 306

Safety
A 1-3
E 2015 Nordson Corporation
All rights reserved
321222_06
Issued 04/2015
A1EN − 02 − [XX − SAFE] − 1
“Qualified personnel” is defined here as individuals who thoroughly
understand the equipment and its safe operation, maintenance, and
repair. Qualified personnel are physically capable of performing the
required tasks, familiar with all relevant safety rules and regulations, and
have been trained to safely install, operate, maintain, and/or repair the
equipment. It is the responsibility of the company operating the
equipment to see that its personnel meet these requirements.
The unit is designed and intended to be used only for the purpose
described in the Description section. Uses not in accordance with that
section or as described in this document are considered unintended uses
and not in accordance with governing regulations.
WARNING: Use of this equipment in ways other than
described in this document may result in personal injury, death,
or equipment damage.
The following actions of the owner or operator of the unit are some, but
not all, examples of unintended use which would permit Nordson to claim
it is not responsible for personal injury or property damage arising from
such unintended use:
S
Unapproved modifications or changes to the unit
S
Failure to comply with the safety instructions
S
Failure to comply with instructions concerning installation, use,
operation, maintenance, or repair, or when these tasks are carried out
by unqualified personnel
S
Use of inappropriate or incompatible foreign materials or auxiliary
equipment
S
Failure to observe workplace safety rules or regulations issued by
government authorities or safety councils
3. Qualified Personnel
4. Intended Use