Nordson Encore HD iControl 2, Installation, Troubleshooting, Repair

Page: 89 / 114

© 2022 Nordson Corporation
1609758-04
5-5 Repair
Touch Screen Replacement
NOTE: Gaskets are glued to the console and pedestal around the display opening. Do
not damage or remove these gaskets as that will destroy the dust-tight integrity of the
enclosure and void agency approvals.
1. Power off the iControl 2 system.
2. Disconnect the video cable, touch screen serial cable, and power cable harness from
the back of the old touch screen unit and set aside.
See Figure 5-3.
3. Remove the mounting nuts (3) from the mounting clamp (2) and set aside.
4. Install the replacement touch screen (1) onto the mounting clamp (2) and tighten all
mounting nuts (3) to 2.5 N•m (22 in-lb).
2
3
3
2
1
Pedestal Installation Console Installation
Figure 5-3 Touch Screen Replacement
1. Touch screen 2. Mounting clamp 3. Mounting nut