Encore Manual Spray Gun - Trigger Switch Replacement
2
Part 1096694A
E
2009 Nordson Corporation
7. See Figure 2. Insert a small screwdriver into the recess in the J2 gun
cable/power supply connectors to release the catch and separate the
connectors.
8. Remove the M5 x 10 nylon screw (24) from the gun body.
J2
24
Figure 2
Disconnecting Cable/Power Supply and Removing Gun Body Screw
9. See Figure 3. Grasp the handle in one hand and the gun body in the
other. Press the thumbs of each hand together while pulling in opposite
directions to gently separate the gun body from the handle.
Figure 3
Gun Body Removal
10. See Figure 4. Remove the elbow (13) from the inlet tube (23).
11. Remove the two M3 x 20 screws (12) from the handle base (22).
12. Pull the base away from the handle about 25-50 mm (1-2 inches).
23
13
12
22
Figure 5
Base Removal
