Operation
4-1
Part 7135457- E
E
2017 Nordson Corporation
Section 4
Operation
WARNING:
Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Daily Operation
The majority of systems are installed with a
Powder Feed Centre.
If a
Powder Feed Centre
is not present, please ignore the steps where it is
mentioned.
In order to successfully colour change the booth and application system
follow the procedure outlined below.
Start Up Procedure
1. Put a box of powder onto the vibrator table in the
Powder Feed Centre
.
2. Start booth extraction by pressing
Fan start
on the booth control panel.
3. Put
Powder Feed Centre
into run mode. Refer to
Powder Feed Centre
manuals.
4. Ensure the dip legs enter the powder and do not catch on the bag.
5. Put the transfer hoses into the waste holsters at the back of the
Powder
Feed Centre
.
6. Start the gun movers on the application control panel. Refer to
application control manuals.
7. Turn on the recycle mode by pressing
Recycle on
on the booth control
panel.
8. Start spraying powder and run production. Refer to
Powder Feed Centre
manuals.
9. After approx. 2 minutes of recycled powder being returned back through
the recycle hose, move the hose into the sieve holster.
