Pinch Valve Assembly
3
Part 768670A
.
2005 Nordson Corporation
Fire Safety
To avoid a fire or explosion, follow these instructions.
:
Do not smoke, weld, grind, or use open flames where flammable
materials are being used or stored.
:
Provide adequate ventilation to prevent dangerous concentrations of
volatile materials or vapors. Refer to local codes or your material MSDS
for guidance.
:
Do not disconnect live electrical circuits while working with flammable
materials. Shut off power at a disconnect switch first to prevent
sparking.
:
Know where emergency stop buttons, shutoff valves, and fire
extinguishers are located. If a fire starts in a spray booth, immediately
shut off the spray system and exhaust fans.
:
Clean, maintain, test, and repair equipment according to the instructions
in your equipment documentation.
:
Use only replacement parts that are designed for use with original
equipment. Contact your Nordson representative for parts information
and advice.
Grounding
WARNING:
Operating faulty electrostatic equipment is hazardous and can
cause electrocution, fire, or explosion. Make resistance checks part of your
periodic maintenance program. If you receive even a slight electrical shock
or notice static sparking or arcing, shut down all electrical or electrostatic
equipment immediately. Do not restart the equipment until the problem has
been identified and corrected.
