EcoMax
7
Part
7593428_01
E
2019 Nordson Corporation
Operation
WARNING:
Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
1. Turn on the supply to the control panel.
2. Press the RESET button (for shutdown, skip this step)
3. Turn on the panel isolator.
4. Start the fan.
5. Turn on the lights.
6. Operate the powder spray equipment in accordance with the appropriate
instructions.
CAUTION:
When operating or cleaning the booth or application equipment,
ensure that the fan is running and appropriate PPE (Personal Protective
Equipment/Clothing) is worn.
7. Shutdown the booth by reversing the above sequence.
8. To empty the booth hopper to a waste bucket, lift the handle on the
hopper and pull out from the booth. Using a scoop, empty the waste
powder into the desired container.
10
11
12
13
14
15
Figure 2
Control Panel Identification
10. Pressure regulator with gauge
11. Light switch
12. Fan START/STOP
13. Emergency Stop
14. Mains isolator
15. RESET button
Daily Startup and Shutdown
