Nordson ASYMTEK Spectrum S-9 Series, Owner'S Manual, Page: 32 / 36

26 Operation
Figure 4-17 Run Production
2. To execute one of the manual run commands, highlight the desired command. The manual
run commands are described in Table 4-1.
Table 4-1 Manual Run Commands
Command Description
Single Dry Run
Select this option to perform one complete run of the program
for one workpiece without dispensing fluid.
Single Wet Run
Select this option to perform one complete run of the program
for one workpiece.
3. Click on the Run Production button to run the program.

NOTE
To execute one of the manual run commands, you must click on the command
PRIOR to clicking on the Run Production button.
Opens the
Run Window
Manual Run
Commands