Nordpeis S-18 F User Manual Download Page 14

Usage

Not enough air to the combustion may cause the glass 

to soot. Hence, supply the fire with air just after the 

wood is added, so that the flames and gases in the 

combustion chamber are properly burnt. Open the air 

vent and have the door slightly ajar in order for the fla-

mes to establish properly on the wood.
Note that the air supply for the combustion also can 

be too large and cause an uncontrollable fire that very 

quickly heats up the whole combustion chamber to an 

extremely high temperature (when using with a closed 

or nearly closed door). For this reason you should never 

fill the combustion chamber completely with wood.

Choice of fuel

All types of wood, such as birch, beech, oak, elm, ash 

and fruit trees, can be used as fuel in the insert. Wood        

species have different degrees of density - the more    

dense the wood is, the higher the energy value. Beech, 

oak and birch has the highest density.

Attention! 

We do not recommend using fuel briquettes/ 

compact wood in our products. Use of such fuel 

may cause the product to overheat and exceed the 

temperatures determined safe. Burning briquettes/ 

compact wood is done so at your own risk and only 

small amounts (max 1/3 of normal load) should be 

used for each load.

Warning:

 

Make sure the insert is not overheated it can cause 

irreparable damage to the product. Such damage is 

not covered by the warranty.

Source “Håndbok, effektiv og miljøvennlig vedfyring” 

by Edvard Karlsvik SINTEF Energy Research AS and 

Heikki Oravainen, VTT.

Warning! 

The Firebox shall to be always closed except during 

ignition, refueling and ash removal. 

Warning: 

NEVER use impregnated wood, painted wood, 

plywood, chipboard, rubbish, milk cartons, printed 

material or similar. If any of these items are used as 

fuel the warranty is invalid.

Common to these materials is that during 

combustion they can form hydrochloric acid and 

heavy metals that are harmful to the environment, 

yourself and the insert. Hydrochloric acid can also 

corrode the steel in the chimney or masonry in a 

masonry chimney. Also, avoid burning with bark, 

sawdust or other extremely fine wood, apart from 

when lighting a fire. This form of fuel can easily 

cause a  flashover that can lead to temperatures 

that are too high.

7. Warranty

Warning!

Use replacement parts recommended only by the 

Manufacturer.

Warning!

Any unauthorized modification of the appliance 

without written permission of the Manufacturer 

are prohibited.

For detailed description of the warranty conditions see 

the enclosed warranty card or visit our website 

www.nordpeis.eu

The 

CE mark 

is placed on the side of the insert. 

8. Advice on lighting a fire

The best way to light a fire is with the use of lightening 

briquettes and dry kindling wood.  Newspapers cause   

a lot of ash and the ink is damaging for the environment. 

Advertising flyers, magazines, milk cartons and similar 

are not suitable for lighting a fire. Good air supply is 

important at ignition. When the flue is hot the draught 

increases and door can be closed

Use clean and dry wood with a maximum moisture 

content of 20%. Humid wood requires a lot of air for the 

combustion, as extra energy/heat is required for drying 

the humid wood and the heat effect is therefore minimal. 

This in addition creates soot in the chimney with the risk 

of creosote and chimney fire. 
 

Storing of wood

In order to ensure that the wood is dry, the tree should 

be cut in winter and stored during the summer, covered 

and in a location with adequate ventilation. The wood 

pile must never be covered by a tarpaulin lying against 

the ground as the tarpaulin will then act as a sealed lid 

that will prevent the wood from drying. Always keep a 

small amount of wood indoors for a few days before use 

so that moisture in the surface of the wood can 

evaporate.

Warning: NEVER use a lighting fuel such as petrol, 

karosine, alcohol or similar for lighting a fire. This 

could cause injury to you as well as damaging the 

product.

Warning: 

In order to avoid injuries, please be 

aware that the surfaface may become hot during 

operation.be hot and that extra care need to be 

taken to avoid skin burn.

 

Warning: In case of a chimney fire, close the door 

and air supplies on the stove / insert and call 

the Fire Brigade. After a chimney fire the chimney 

must in all cases be inspected by an authorized 

chimney sweeper before you use the appliance 

again.

14 

GB

Summary of Contents for S-18 F





























Reviews: