PLACEMENT
In order to deliver its full performance,
the Q
base
should be placed on a
stable solid surface, ideally on a
dedicated shelf on an audio rack or
amp stand. It should be positioned to
allow maximum separation between
the system’s AC power cords and
signal leads.
CONNECTION
Each Q
base
has an IEC input on one
end. The unit is symmetrical so that
this can be arranged to the left or right
as circumstances dictate. In order to
install your QRT unit, first switch off
your system. Then connect the Q
base
to the wall, using a Nordost or other
high quality power cord. The system’s
units should then be connected to
the Q
base
in the order shown by the
diagrams on the left.
It is important to connect the line-
stage or integrated amplifier to the
Primary Earth socket located at the
center of the ground star. Principal
sources should be connected in
system order between the AC input
and the Primary Earth, balanced by
power amp(s) and secondary sources
on the other side of this central
socket.
While the high-quality WBT binding-
post should be connected to an
independent clean ground, the
system will function as normal without
this connection. However, providing
a clean signal ground is one of the
most cost-effective upgrades you can
make to any audio or video system, as
well as maximizing the benefits of the
Q
base
Focussed Earth technology.
Finally, turn on the AC supply to
the Q
base
, followed by the system
components, running from sources
first to power or integrated amplifier
last. Sit back and enjoy the results.
I N S T A L L A T I O N
