•
Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates
should be inserted by aligning to hole plates otherwise water may leak.
•
Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make the water run into the basin.
•
When the appliance is in use and depending on the programme selected there can be
hot water in the pump. Never remove the pump cover during a wash cycle. Always wait
until the appliance has finished the cycle and is empty. When replacing the cover, ensure
that
it is securely re-tightened.
Cleaning Drain Pump Filter
•
Be careful of hot water!
•
Allow detergent solution
s
to cool down prior to cleaning.
•
Unplug the machine to avoid electrical shock before washing.
•
The drain pump filter can filter threads and small foreign objects
from the wash.
•
Clean the filter periodically to ensure the normal operation of
wash
er dryer
.
After the power is
disconnected, pull out
the Dam-Board.
Twist the filter as shown
above and take out
foreign
objects
.
1
2
3
Re-insert each part after
the foreign
objects
have
been removed.
Warning!
！
10
24
Caution!
MAINTENANCES
Dam-Board
