FINAL INSTALLATION
THE CONTROLS
A. THE TIMER
Select the required drying time based on the recommendations on the control panel.
B. HEAT SWITCH(ES)
Select the required heat setting based on the recommendations on the
control panel.
C. START BUTTON
Press Start button after closing the door and selecting the required drying
time.
PREPARATION
Check care labels inside the garments
.
CARE LABELS YOU MAY FIND ON YOUR FABRICS
Do not tumble dry woollen or wool mixture articles unless the article is labelled as being suitable .This
should avoid shrinkage.
Place delicate articles, e.g.tights, scarves, inside a pillowcase.
To avoid the need to iron easycare polyester/cotton items it is better to only dry small loads (i.e. half fill
drum) It is better to dry small and large articles together.
Push the filter into its operating position as shown in
the diagram. If you wish to change the side on which
your door opens, see the instructions on the back
page. Remove any dust by wiping the drum and door
with a damp cloth. Any initial smell of burning will
be caused by dust on the heater and will quickly
disappear.
