FITTING THE OVEN INTO THE KITCHEN UNIT
Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a worktop or
into an upright unit. Fix the oven in position by screwing it into place, using the two fixing holes in
the frame. To locate the fixing holes, open the oven door and look
to either side of the frame
. To
allow adequate ventilation, please follow the measurements and distances that need to be
adhered to when fi
t
t
ing the oven on page 11.
IMPORTANT
It is important that the kitchen housing unit is suitable in order for the oven to work properly. The
panels of the kitchen unit that are next to the oven
,
must be made of a heat resistant material.
Ensure that the glues of units that can withstand temperatures of at least 120ºC. Plastics or glues
that cannot withstand such temperatures will melt and deform the unit, once the oven has been
lodged inside the unit, electrical parts must be completely insulated. This is a legal safety
requirement. All guards must be firmly fixed into place so that it is impossible to remove them
without using special tools. Remove the back
panel
of the kitchen unit to ensure an adequate
flow
of air circulates around the oven. The hob must have a rear gap of at least 45mm.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been
damaged in any way. If you have any doubts at all, do not use it:
contact the NordMende Service Department. Keep packing
materials such as plastic bags, polystyrene, or nails out of the reach
of children
, as they a
re dangerous to children.
5
