background image

EN - 1

6

7.. THE CONTR

OL 

PANEL

Rotate the Programme Selection Knob 

(

3

) to switch the machine on and select

suitable programme for your dishes. When

the knob is in the 'Off' position, the machine

will not operate.

Press the Start/Pause button (

2

) to start 

the selected programme. The Start/Pause 

light will switch off and the Wash light will 

illuminate. If the door of your machine is 

opened while a programme is in operation, 

the Start/Pause light will flash.

NOTE: 

Press and hold the Delay 

button (

1

) for 3 seconds to activate the Half 

Load function, which shortens the duration 

of a programme. Press and hold the button 

again for 3 seconds to cancel it.

NOTE: 

If an extra feature is used, 

such as the Delay or Half Load, (

1

)

 

on the 

most recent wash programme, this feature 

will remain active on the next selected 

programme. To cancel this feature on the 

newly selected wash programme, turn the 

Programme Selection Knob to the 'Off' 

position, then turn the machine on. Extra 

features can be activated with the newly 

selected programme.

Delaying the Programme

Press the Delay button to delay the start 

time of a programme for 3, 6 or 9 hours. 

Pressing the button once will delay the start 

time for 3 hours, pressing twice will delay 

for 6 hours, and pressing a third time will 

delay the start time for 9 hours. If the button 

is pressed for a fourth time, there will be 

no delay. Press the Start/Pause button to 

activate the delay. The programme can be 

selected first and the delay time after, or 

vice versa. To cancel or change the delay 

time, press the Start/Pause button first, then 

select a new delay time. The delay time 

can be cancelled by turning the Programme 

Selection knob to the 'Off' position. During 

a delay, the light corresponding to the 

remaining time is switched on.

7.1. Changing a Programme

Follow the steps below to change a 

programme while in operation.

Press the Start/Pause button.

After the programme stops, 

select a new programme using 

the Programme Selection Knob.

Press the Start/Pause button 

to start the newly selected 

programme.

The new programme will 

resume the course of the 

old programme.

Summary of Contents for DW642WH




























Reviews: