background image

EN - 7

In the absence of earthing 

installation, an authorised 

electrician should carry out an 

earthing installation. In the case of use 

without earthing installed, we will not be 

responsible for any loss of use that may 

occur. 

     The plug on this appliance may 

incorporate 13A fuse depending on 

the target country. (For Example UK, 

Saudi Arabia)

2.5  Electrical connection

WARNING:

 Your machine is set to 

operate at 220-240 V. If the mains voltage 

supply to your machine is 110 V, connect a 

transformer of 110/220 V and 3000 W 

between the electrical connection.

Connect the product to a 

grounded outlet protected by a fuse 

complying with the values in the 

"Technical Specifications" table".

The earthed plug of the 

machine must be connected 

to an earthed outlet supplied by 

suitable voltage and current. 

2.6.  Fitting the machine undercounter

If you wish to fit your machine undercounter, 

there must be sufficient space to do so and 

the wiring-plumbing must be suitable to do 

so (

1

). If the space under the countertop is 

suitable for fitting your machine, remove the 

worktop as shown in the illustration (

2

).

 

WARNING: 

After removing the top 

panel of your dishwasher, the machine 

should be placed in a space of the 

dimensions shown in the figure below.

WARNING:

 The countertop, of which 

the machine will be placed under, must be 

stable in order to prevent imbalance.

The top panel of the dishwasher must 

be removed to fit the machine under the 

countertop.

To remove the top panel, remove the screws 

that hold it on, located at the rear of the 

machine. Then, push the panel 1 cm from 

the front towards the rear and lift it. Adjust 

the machine feet according to the slope of 

the floor (

3

).

Fit your machine by pushing it under the 

counter taking care not to crush or bend the 

hoses (

4

).

H1: min A

H2: min B1

H3: min B2

A

B

All

Products

B

1

B

2

Product’s Height

(±2 mm)

820 mm

830 mm

835 mm

A: 

If there is not felt on the top of the

product; you you should take into account

this product’s height.

B

1

: If there is felt on the top of the product

with 2nd basket; you should take into

accountthis product’s height.

B

2

: If there is felt on the top of the product

with 3rd basket; you should take into

accountthis product’s height.

Summary of Contents for DW642WH




























Reviews: