Easy pit
ch
Now you can set up the ridge pole, stay outside, just kneel down in front of the
door. Now you Insert it into the turtle hub soft connection system inside the
tent – located at the top of each door. You use the middle hole and insert the
non-adjustable end first. Then go to the other end door and keep the tension
towards the already inserted end, then release adjuster and extend the pole
into the opposite middle turtle hub. When you feel there is good tension, move
onto the corner poles.
Now you need to dive into the tent, insert a corner pole, straight end first into
the turtlehub. Maintain tension and point the bend end toward the lower
middle wall, now connect the bend segment and set it down towards the floor.
Then slide it in towards the corner and clip on the corner clip. Once you have
done 2 at the one end, then attach the guy rope and peg that out so the door
is vertical, repeat for the opposite end, and create tension with the 2 guyropes
till both doors are vertical.
