Easy pit
ch
lay out the Midgard with ground sheet facing down - so directions suit your
wish for large door openings (front and back). Stretch out the 4 corners and
peg these. Make sure that the adjustable webbing is extended to allmost
maximum. Drive the peg only half way as you may need to adjust later.
Now identify all 10 poles. There are 4 small ones (for windows) 4 medi-
um (for doors) and 2 large ones for inner A-frame. Lay out the 8 window
and door poles and thread them into the designated pole holder/sleeves
along the overhang. The blunt end towards the middle of the tent, and
fit it into the Nordisk turtle hub hole. Do so an opening at a time, when
all 4 openings are done, push the pin end into the designated Nordisk
alu helmet slide – there are 2 each corner (at M20, there is one at each
door overhang end) ) and note the direction towards the opening you
are operating.
