NordicTrack Wasatch Uintah User Manual Download Page 3

3

WARNING:

To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your bicycle before using your bicycle. ICON
assumes no responsibility for personal injury or property damage sustained by or through the use
of this product.

IMPORTANT PRECAUTIONS

1. Before beginning any athletic activity, con-

sult your physician. This is especially impor-
tant for persons over the age of 35 or per-
sons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of the bicycle are adequately
informed of all precautions.

3. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.  

4. Your bicycle should not be used by persons

weighing more than 250 lbs. (113 kg).

5. It is your responsibility to ensure that your

bicycle is in safe working condition before
cycling (see PRE-CYCLING INSPECTION on
page 19).

6. Your bicycle has not been designed for com-

petition, stunt, or trick riding. Do not perform
these activities with your bicycle.

7. Never modify your bicycle frame or parts in

any way, including sanding, drilling, filing,
removing redundant retention devices, or
installing incompatible forks. An improperly
modified frame, fork, or component can
cause you to lose control of your bicycle
and fall.

8. Inflate your tires to the pressure marked on

the sidewalls of the tires. Use a manual hand
pump to inflate your tires; do not use com-
pressed air.

9. Do not cycle with your tires underinflated;

the sidewalls on the tire may crack and dam-
age the wheel rims.

10. Never carry a passenger on your bicycle.

11. Never hang bags, clothing, or other articles

on the handlebar of your bicycle; this will
affect your steering.

12. Always wear a protective helmet when

cycling.

13. Wear appropriate clothes when cycling; do

not wear loose clothes that could become
caught on your bicycle. Always wear shoes
with a textured tread for foot protection.

14. Hold the handlebar when mounting, dis-

mounting, or using your bicycle.

15. Keep your back straight while using your

bicycle; do not arch your back.

16. Squeeze both brake levers when slowing or

stopping your bicycle.

Summary of Contents for Wasatch Uintah

























Reviews: