9
7
87
61
13
72
71
72
72
7. While a second person holds the Console (13)
near the Pivot Bracket (71), plug the Upper Wire
(87) and the two Pulse Wires (61) into the recep-
tacles on the Console.
IMPORTANT: The connectors on the Wires
(61, 87) should slide easily into the recep-
tacles and snap into place. If a connector does
not slide easily, turn the connector and try again.
If you do not insert the connectors properly,
the Console (13) may become damaged when
you use the exercise bike.
Insert the excess wire into the Pivot Bracket (71).
Tip: Avoid pinching the wires. Attach the
Console (13) to the Pivot Bracket (71) with four
M4 x 16mm Screws (72); start all the Screws,
and then tighten them.
8
84
12
15
8. Tip: Avoid pinching the wires. Press the Front
Pivot Cover (12) and the Rear Pivot Cover (15)
together around the Pivot Bracket (71).
Attach the Front and Rear Pivot Covers (12, 15)
to the Pivot Bracket (71) with two M4 x 22mm
Screws (84).
Avoid pinching
the wires
71
71
Avoid pinching
the wires
